How to Access Your SiteBoard Settings Using the Built-in Hotspot

The SiteBoard hotspot feature provides a convenient way to access your device's settings when it's offline. This guide will walk you through the process step by step.

Automatic Hotspot Activation

For devices running version 2.28 and above, the hotspot will automatically start when your SiteBoard has been offline for more than 30 minutes. This ensures you can always access your device settings even when your primary internet connection is down.

Step-by-Step Instructions

1. Ensure Your SiteBoard is Offline

Make sure your SiteBoard device has been offline for at least 30 minutes (for version 2.28+) or manually activate the hotspot if available on your version.

2. Access Your WiFi Settings

On any WiFi-enabled device (smartphone, tablet, PC, or laptop), open your WiFi settings to view available networks.

3. Locate the DAKboard network.

Look for one of the following network names in your WiFi list:

• DAKboard (for devices running version 3.0 and above)
• DAKboard-{Your Serial Number} (for devices running version 2.31 and below)
  
  

4. Connect to the Hotspot

Click on the SiteBoard network to connect. If prompted for a password, enter: dakb5142

5. Open Your Web Browser

Once connected to the SiteBoard hotspot, open any web browser on your device.

6. Access the Settings Page

In your browser's address bar, type the following URL: http://10.0.0.5

This will open your DABoard's settings page where you can configure your device.

7.Access Network Selection and Select from Available Networks

SiteBoard Ethernet Connection:

Overview

This guide provides step-by-step instructions for establishing Ethernet connectivity on SiteBoard devices. The configuration process varies depending on your device's software version and current network setup.

Version Requirements

SiteBoard Version 2.28 and Older: Must remove WiFi credentials first, then connect Ethernet cable.

SiteBoard Version 2.30 and Above: Simply plug in Ethernet cable - no WiFi removal needed.

Ethernet Connection Setup

For Version 2.30+

1. Connect Ethernet cable
2. Device automatically detects connection
   
   

For Version 2.28 and Older

1. Remove WiFi credentials first (see section below)
2. Connect Ethernet cable
3. Device automatically links to account
   
   

Removing WiFi Credentials

When WiFi Removal is Required

Complete the following steps if:

• Your SiteBoard version is 2.28 or older and currently configured for WiFi
• You want to remove existing WiFi configuration regardless of version
  
  

Step-by-Step WiFi Removal Process

Step 1: Access Device Settings Navigate to the 'Displays & Devices' section in your account dashboard.

Step 2: Open Device Menu Select the settings menu for the specific device you want to configure.

Step 3: Access Network Configuration From the network list, select 'Join Other Network'.

Step 4: Clear Password Field Remove the password that is currently configured in the password field by deleting all characters.

Step 5: Save Configuration Click 'Save Changes' at the bottom of the screen to apply the new settings.

Alternative Method for Version 3.0 and Newer

Factory Reset Option

For devices running version 3.0 and newer, you can use the Factory Reset button to clear all settings, including WiFi credentials.

Step 1: Locate Factory Reset Find the Factory Reset button in your device settings.

Step 2: Execute Reset Click the Factory Reset button to clear all device configurations.

Step 3: Reconfigure Device After factory reset, proceed with Ethernet connection setup.